Waterproof Batten IP66
Well design for resistant Dust and Moisture resistance and waterproof.
Anti-UV Clear polycarbonate housing and polycarbonate linear prisms diffuser.
Silicone-sponge Gasket , stainless steel toggles and stainless-steel Quick fix bracket. Ingress-protected to a level of IP66.
Comply with Hot Wire Testing: 850°C and Electrical protection class I.
Impact protection IK10
Installation / 安裝方式 / Instalación
Pendant mounted / Surface mounted / Wall Mounted
吊裝 / 吸頂式 / 壁掛式
Montaje colgante / Montaje en superficie / Montaje en pared
Dimension / 尺寸 / Dimensión
Single Tube Batten LED T5 or LED T8
L:655 x W:90 x H:92mm L:1265 x W:90 x H:92mm L:1565 x W:90 x H:92mm
Twin Tube Batten LED T5 or LED T8
L:655 x W:130 x H:92mm L:1265 x W:130 x H:92mm L:1565 x W:130 x H:92mm
Input Voltage / 輸入電壓 / Voltaje de entrada
AC220 - 240V 50/60HZ
Power Consumption / 燈具功率
Consumo de energía
Single Tube Batten LED T5 or LED T8
2 feet : 1 x 6W 1 x 7W 1 x 8W 1 x 9W 1 x 10W
4 feet : 1 x 12W 1 x 13W 1 x 14W 1 x 15W
4 feet : 1 x 16W 1 x 18W 1 x 20W
5 feet : 1 x 20W 1 x 22W 1 x 24W 1 x 25W 1 x 30W
Twin Tube Batten LED T5 or LED T8
2 feet : 2 x 6W 2 x 7W 2 x 8W 2 x 9W 2 x 10W
4 feet : 2 x 12W 2 x 13W 2 x 14W 2 x 15W
4 feet : 2 x 16W 2 x 18W 2 x 20W
5 feet : 2 x 20W 2 x 22W 2 x 24W 2 x 25W 2 x 30W
LED Driver Type / LED驅動款式
Tipo de controlador LED
Integrated Type or Remoted LED Driver
Consulte la especificación de controlador de LED
1. On / Off Switch AC220-240V 50/60Hz Cable wire for AC LED Tube
2.0/1-10V Dimming Driver AC220-240V 50/60Hz for DC LED Tube
3. DALI Dimming Driver AC220-240V 50/60Hz for DC LED Tube
4. ZIGBEE Wireless Control (Remoted Driver ) AC220-240V 50/60Hz for DC LED Tube
5. Emergency Backup >2 hours or >3 hours @ < 12 charger hours 應急電池 / Copia de seguridad de emergencia
6. Microwave Sensor On / Off
Control Protocol / 控制協議
Protocolo de Control
0/1-10V / DALI / ZIGBEE Wireless Control
Beam Angle / 光束角 / ángulo de haz
Refer to LED T5 / T8 tube data sheet
Photobiological safety (IEC 62471)
光生物安全檢驗(ICE 62471)
Seguridad fotobiológica (IEC 62471)
Low Risk Group 1 (RG1) Refer to LED T5 / T8 Specification
低風險組1 (RG1) 參閱LED T5 / T8規格
Grupo de bajo riesgo 1 (RG1) Consulte la especificación LED T5 / T8
Housing materials / 外殼材料
Materiales de la carcasa
Anti-UV Clear polycarbonate housing and polycarbonate linear prisms diffuser.
Silicone Gasket, Stainless Steel Toggles and Stainless-Steel Quick fix bracket.
防紫外線透明聚碳酸酯外殼和聚碳酸酯線條棱鏡擴散器.
矽膠墊片，不銹鋼扣和不銹鋼快速固定夾.
Carcasa de policarbonato transparente anti-UV y difusor de prismas lineales de policarbonato.
Junta de silicona, palancas de acero inoxidable y soporte de fijación rápida de acero inoxidable.
Housing Color / 外殼顏色
color de la carcasa
Light Grey body and Clear diffuser
淺灰色主體和透明擴散器
Cuerpo gris claro y difusor transparente
Operating Temperature Range / 工作溫度範圍
Rango de temperatura de funcion amiento
-20 °C / + 40 °C
Operating Humidity / 工作濕度
Humedad de funcionamiento
0~90%, non-condensing / 不結霜
sin condensación
Ingress Protection / 防護等級 / Protección de ingreso
IP66
Impact Protection / 衝擊防護
Protección contra impactos
IK10
Comply Testing Standard
符合測試標準
Cumplir el estándar de prueba
LED Luminaires: IEC/ EN 60598-1 / EN 60598-2-1 / EN 62031 / EN 62493 / IEC/EN 62471 / IEC 60598-2-22 / IEC 62031 /EN 55015 / EN 61000-3-2 / EN 61000-3-3 / EN 61547 / IEC 62262 / IEC 60529 / IEC TR62778
Luminaries Performance : IEC 62722-1 / IEC 62722-2-1 FSD regulation PPA 104A (4th Rev). RoHS
