E-SOLO

Emergency Converter for AC LED Lighting

10V-220V

Suitable for Maintained or Non-maintained luminaires.
Electronic charge system
Deep discharge protection
Snort-circuit proof battery connection
Automatic shutdown protection if the LED load is out of range.
Simple wiring /installation.
2 hours or 3hours emergency backup with either Ni-MH battery or Ni-Cd battery
Provided with a lP20 robust steel iron remote box
Optional IP65 Waterproof Die-casted Aluminum Box Provided with a LED for indication when battery charge is in process.
Polarity reversal protection for battery
Tested in accordance with latest local requirement PPA/104(A) (5th Revision).

Technical Data

Input Rated Voltage

Frequency

220-240VAC 50/60Hz

220-240VDC
AC Input Current

50mA
AC Input Power Rated

40W max.
Power Factor

> 0. 95
Charge time

12 hours
No-load Power Consumption

3W
Output emergency power

Max 12W
Output voltage

10…220 V
Battery Type

Ni -MH or Ni-Cd battery
Battery Accessories
- 9.6V 1.2Ah
- 9.6V 1.6Ah
- 9.6v 2.2Ah
- 9.6v 2.8Ah
- 9.6v 3.6Ah
- 9.6v 4.5Ah
Luminaires Type

Maintained or Non Maintained Type refer to wiring diagram
Rated duration

2 hours or 3 hours
Protection

Short Circuit Protection; Overload Protection;No-load Protection;
Environment

Ta/Operation Temperature: 0….+50°C

Ts/Storage Temperature: -25… .+85°C

Tc/Enclosure Temperature: 70°C max.

Humidity: 10%....90%RH
Construction

Connection Method: Direct Lead

PRI Wire preparation: 0.5-1.0 sq.mm
Dimension

200X39X26mm (L*W*H)
MTBF

Switching Testing

>100000 hours

> 10,000 times
Life Time

50,000h @50°C（Ta）/ @70°C（Tc）
Plug Terminal

JST VHR-2N/3.96mm Plug Terminal for Battery and LED indicator Connection
Accessories

Test switch

Status indication LED Light :GREEN-FULLYCHARGED ; RED- CHARGING ; YELLOW.FAULT
Safety Standards

CE IEC/EN 61347-1; IEC/EN 61347-2-13; IEC/EN 62384; IEC/EN 61000-3-2; IEC/EN 61000-3-3;IEC/EN61574;EN 55015
Housing materials

Zinc Iron
Housing Color

White coating